take an empty usb and enter the file allupgrade506_1gb_8GB_sos.bin
now insert the usb into the usb port of the tv.
hold the power button on the TV with one hand and with the other plug the TV cable into the mains
the software upgrade procedure will start on the TV
wait until it fills up to 100
now remove the usb from the usb port of the tv
also remove the TV cable from the power supply.
plug in the TV cable again
on the TV, first the TV logo is announced and then it switches to Android recovery (reboot system now)
with the TV remote, go to (wipe data/factory reset)
confirm with enter on the remote
now go to yes and confirm again with enter on the remote
finally you have (reboot system now) confirm with enter
the tv returns to stdby genjene. now turn on the tv with power on the remote or keyboard on the tv
now the tv returns to factory settings
this is the procedure
boussakri كتب: ↑الاثنين 15 أغسطس 2022 11:31 pmبعد عدة محاولات تم التمرير بنجاح.
شكرا لكم جميعا أيها الكبار.
مبروك الاصلاح
لوتفضلت وقرات شحنة emmc ليستفيد منها الجميع
أخي ahyod، لم يسبق لي أن قرأت شحنة EMMC.
ولكن سأفعل إن شاء الله بمساعدتكم
أنا لدي مبرمجة RT 809H هل تافي بالغرض؟
إذا كانت تافي الغرض أطلب منكم شيما لهذا الموديل
شكرا.