طلب مساعدة Firmware sunny sn39dil13/0216

[khalid XD]

اسلام عليكم
لدي تلفاز موديل sunny sn39dil13/0216
بورد 13at204v1.0
بانيل T390XVN02.0L-TYFE
مررت له فلاش ظهرت صورة مقلوبة وعفرتية
ذخلت لقائمة سرية لا يحفظ اعددات بعد تعديل
من لديه حل يساعدنا وشكرا لجميع

[labrid]

السلام عليكم ورحمة الله
يمكن التعديل عبر urat
الطريقة مجربة على نفس الجهاز

[khalid XD]

صراحة اخي الكريم
لم يسبق لي اشتغلت على هدا برنامج لو عندك موضوع لشرح وشكرا

[fadili]

I hope this small file will help you. The procedure is the same as with firmware via USB.

[khalid XD]

I hope this small file will help you. The procedure is the same as with firmware via USB.

شكرا لك
لم يشتغل معي

[fadili]

I believe you used the right method.?

[fadili]

Auo +panda

[khalid XD]

I believe you used the right method.?

Yes, I put two files on the USB drive. The update finished, but the same problem persists: the image is upside down and not normal.

[fadili]

If you have any problems, leave your email on the forum and I will send you the USB firmware.

[fadili]

maybe it's not too much if you do this. First, remove the downloaded file from the zip and put it on a USB drive, no larger than 2-4GB. Now insert the USB into the USB port of the TV. Now connect the power cable to the network. On the TV screen, a bar should appear that fills with lines very quickly. After this happens, unplug the TV cable from the power outlet. Wait a few seconds and insert the TV cable into the power outlet again.
Start the TV with its remote or with the power button on the TV itself and the picture should be normal.