الفارابي للإلكترونيات

صديقي زودنا بالقياسات

you can try with this usb firmware same main+panel

mhmd193 كتب: ↑الثلاثاء 24 أغسطس 2021 8:34 pm صديقي زودنا بالقياسات

شكرا اخي الفاضلي القياسات موجودة
12v 5v 3.3
ربما نقص في 1.4 من جهة المعالج

fadili كتب: ↑الثلاثاء 24 أغسطس 2021 8:46 pm you can try with this usb firmware same main+panel

شكرا اخي مررت له الفلاش
28315917_MB130_DALI_QUI_YODA_V57200_SVN_298746_.XLS.ZIP
انطفأة اللمبة الحمراء ولم يشتغل توقف بالكامل .

boudal كتب: ↑الثلاثاء 24 أغسطس 2021 10:13 pm

fadili كتب: ↑الثلاثاء 24 أغسطس 2021 8:46 pm you can try with this usb firmware same main+panel

شكرا اخي مررت له الفلاش
28315917_MB130_DALI_QUI_YODA_V57200_SVN_298746_.XLS.ZIP
انطفأة اللمبة الحمراء ولم يشتغل توقف بالكامل .

المرجو من الاخوان من لديه دامب او شحنة الناند الجهاز توقف

can you be a little clearer about the problem. please write in english. as far as i understand your main board does not start and the LED is constantly blinking

fadili كتب: ↑الثلاثاء 24 أغسطس 2021 10:36 pm can you be a little clearer about the problem. please write in english. as far as i understand your main board does not start and the LED is constantly blinking

Was blinking now after flashing with software ist stop blinking at all

حسين الزاكي كتب: ↑الثلاثاء 24 أغسطس 2021 10:44 pm

fadili كتب: ↑الثلاثاء 24 أغسطس 2021 10:36 pm can you be a little clearer about the problem. please write in english. as far as i understand your main board does not start and the LED is constantly blinking

Was blinking now after flashing with software ist stop blinking at all

Thanks
Mother Card 17MB130s Problem The light is blinking red from before the update.
But after the update that you attached to me in the previous post, I passed it to the TV and it turned off and no longer flashed or turned on.
The TV is off now

you need to reprogram spi with programmer .tonight is late but tomorrow i will see how can help you.