rt28xx logo change+ recovery mode

[elkhayati]

السلام عليكم و رحمة الله
إليكم طريقة تغيير لوغو الشاشات ذوات المعالج rt28xx
مثال HK.T.RT2842P639 euroview 32
الشرح بالصور مع مرفق لوغو الشاشة و رابط البرنامج المستعمل

[elkhayati]

recovery mode

[fadili]

Dear Elkhajati, it would be good if you could clarify how you do the recovery for the rtk2841 ... because here there is no file that would be loaded on the USB stick. Thank you for your understanding.

[elkhayati]

Dear Elkhajati, it would be good if you could clarify how you do the recovery for the rtk2841 ... because here there is no file that would be loaded on the USB stick. Thank you for your understanding.

Passing the wrong firmware (false file) causes the TV to enter recovery mode
Provided that the file is of type img and that the name is correct

for example

change the extension of any JPG to .IMG & rename it to install_2842.img



تمرير فيرموار غلط يجعل التلفاز يدخل لوضع الريكوفري
بشرط أن يكون الملف من نوع img و أن يكون الإسم صحيحا

[elkhayati]

لتغيير امتداد الملف
To change the file extension

[elkhayati]

لمن يجد صعوبة في تغيير امتداد الملفات
إليكم مرفق ملف img يمكنم فقط تغيير الإسم حسب المطلوب
For those who find it difficult to change the extension of files
Here is the img file attached, you can just change the name as required
The file is actually a picture of the Palestinian flag

[fadili]

thanks for the explanations
I have a TV with main P75-2841v6.0 which is fine. I tried the recovery that you explained but it didn't work, maybe it should be stuck on the logo to be realized.

[elkhayati]

The method did not work with tcl mains even though the processor is the same..
Have you tried changing the name to rtk2841.img .. To find out the desired name, use uart

the method has been tested on HK.T.RT2841 and HK.T.RT2842
It is not a requirement that the device boot

[fadili]

I'm giving some clarification if it's not too much about the RAW logo. If you want to convert any photo jpg format for TV with HD and UHD resolution, first use rsize-image-to-1920x1080. here is the link where you can do it: [External Link Removed for Guests]. then do as the dear elkhayati colleague has explained.

[elkhayati]

Dear Elkhajati, it would be good if you could clarify how you do the recovery for the rtk2841 ... because here there is no file that would be loaded on the USB stick. Thank you for your understanding.

The method does not work on rt2861/rt2841/ rt2831 / rt2861
package4 no recovery

it work with a firmware ho contain : package7.. rt2842/rt2843/rt2851