طلب مساعدة stream BM58c1 smart تحديث

[elkhayati]

جرب تسمية الملف ب MstarUpgrade
هل يوجد اتصال عبر uart ؟

[ouhid2004]

جرب تسمية الملف ب MstarUpgrade
هل يوجد اتصال عبر uart ؟

نعم يوجد اتصال ولا كن لايدخل في مود كنسال
UART_115200

AC_ON
01-2L-SM-04-20200210
MIU0_DQS-OK
BIST0-OK
BAP=1
BAP=1
optee teeloader entry
Load armfw failed!
ree_opt=0000007B
BAP=1
Auth reeloader...
Decrypt reeloader...
Check reeloader magic ID...
Version check on reeloader...
BAP=1
BAP=1
Auth CKB...
Decrypt CKB...
Check CKB magic ID...
ns_uboot_boot
ree_entry
U[AT][MB][start ub][293]

U-Boot 2011.06-00000-g500f92a-dirty (Nov 24 2022 - 20:49:13)

[ERROR] MstarSysInit:194: Optee OS is not running!!!
[Mboot] ===== sw IR Config Register =====
[Mboot] ===== Attach IR Interrupt ======
Uboot Relocation: 152 MiB

eMMC HS400 5.1 200MHz
eMMC 7.28 GB
eMMC used life: 10~20%
CID
0x0037098C
0x1A2E0652
0x34465447
0x38000115
DRAM :
SAR5=ON
In: serial
Out: serial
Err: serial
Net: No ethernet found.
MAC: 0xF4: 0xED: 0x5F: 0x66:0x1F: 0x31
[AT][MBoot][Driver Init][350]
AC on
mmc change mount : tvconfig
** File not found model.info
[ERROR] vfs_getsize:411: ext4filesize mmc fail
No enough buffer or path fail(model.info) :
[src/MsUtility.c] [loadscript]
model.info not find !! Clean model_info env
mmc change mount : tvconfig
** File not found /vendor/tvconfig/config/onebin/model_4/MMAP_MI_m7332_1.5G_AN_KERNEL_MODE_IOMMU_UMA_WW.h
[ERROR] vfs_getsize:411: ext4filesize mmc fail
No enough buffer or path fail(/vendor/tvconfig/config/onebin/model_4/MMAP_MI_m7332_1.5G_AN_KERNEL_MODE_IOMMU_UMA_WW.h) :
[src/MsUtility.c] [loadscript]
filter /vendor /config, and find file again!!
** File not found /tvconfig/config/onebin/model_4/MMAP_MI_m7332_1.5G_AN_KERNEL_MODE_IOMMU_UMA_WW.h
[ERROR] vfs_getsize:411: ext4filesize mmc fail
No enough buffer or path fail(/tvconfig/config/onebin/model_4/MMAP_MI_m7332_1.5G_AN_KERNEL_MODE_IOMMU_UMA_WW.h) :
[src/MsUtility.c] [loadscript]
filter /vendor /vendor /config, and find file again!!
Size of file "/config/onebin/model_4/MMAP_MI_m7332_1.5G_AN_KERNEL_MODE_IOMMU_UMA_WW.h" from mmc device 0 partition tvconfig: 42641 bytes
Loading file "/config/onebin/model_4/MMAP_MI_m7332_1.5G_AN_KERNEL_MODE_IOMMU_UMA_WW.h" at offset 0x0 from mmc device 0 partition tvconfig
42641 bytes read
Size of file "/config/onebin/model_4/MMAP_MI_m7332_1.5G_AN_KERNEL_MODE_IOMMU_UMA_WW.h" from mmc device 0 partition tvconfig: 42641 bytes
Loading file "/config/onebin/model_4/MMAP_MI_m7332_1.5G_AN_KERNEL_MODE_IOMMU_UMA_WW.h" at offset 0x0 from mmc device 0 partition tvconfig
42641 bytes read
no miu_setting information in mmap.ini
no miu_setting information in mmap.ini
[ERROR] _get_new_map_format_from_env:529: get E_LX_MEM_LEN fail
[ERROR] syncMmap2bootargs sync LX_MEM fail
[ERROR] do_sync_mmap_to_env sync the part of mmap info to bootargs fail
0:MCP_N_D3_2133_8G_4x
1:MCP_N_D3_2133_4G_4x

Changelist: 24543697
do not first setup(first_setup=1), skip self adaption.
============= set bootargs ===============
WDT is not Enable !!!setenv WDT_ENABLE 1 to enable it.
Hit any key to stop autoboot: 0
enable dont overwrite function
AC on
[Mboot_IR] boot from dynamic ir
Kevin:info:get_boot_mode_from_keypad:[895] Uart is on
fore uup u8KeyPad_KeyVal [0xFF]
ENV_UPGRADE_COMPLETE =0
ENV_UPGRADE_MODE =null
androidboot boot reason =reboot
MOD Output Channel Order not set!!!!
[QHB] normal boot mode
Active Standby Mode FALSE =====

MsDrv_PNL_Init:Bypass SetDivison
LINK TYPE = EXT mi OLED support = 0
[MApi_XC_MLG_GetStatus, 2891]No instance existed, please get an instance by calling MApi_XC_Init() first
[XC,Version]
[ERROR] _get_new_map_format_from_env:529: get E_MMAP_ID_XC_AUTODOWNLOAD_ADR fail
[msReadEfuse][3735]u32Result=tx, after mask u32Result=tx
[Utopia][PNL]: Swing_Level in =250
[Utopia][PNL]: [_MHal_PNL_MOD_Swing_Refactor_AfterCAL]Swing value after refactor = 15
[AT][MB][panel_pre_init][1196]
Kernel command line: androidboot.boot_devices=mstar_mci.0 buildvariant=userdebug
-usb_stop(USB_PORT0)
-usb_stop(USB_PORT1)
-usb_stop(USB_PORT2)
Loading Kernel Image ... OK

---MsDrv_PNL_BackLigth_On:1781 Set MsDrv_PNL_BackLigth_On DelayTask 346
[QHB] normal boot mode
Active Standby Mode FALSE =====
[AT][MB][start kr][1748]

Starting kernel ...

[pulse1960]

ربما تستعمل putty مثلا وتحاول تمرير التحديث بالامر المناسب: custar.
واذا لم تنجح الطريقة ستتعقد الامور حيث يجب تشحين الـ emmc